Category: SludgeWatch Monitors
The ASLD2200 is a fully automatic sludge blanket level detector designed for the water and waste water industry. It utilises a servo-driven sensor which continually tracks the settled interface with the sensor at the very top of the interface zone.
Continuous monitoring of the sludge/water interface or sludge blanket is central to the efficient operation of clarifiers, thickeners and settlement tanks. Reliable measurement enables a control system to maintain the optimum depth of sludge in the tank. A sludge interface that is too high can result in pollution incidents caused by carry-over from a final settlement tank. The sludge can also become too thick to extract easily or can turn septic if left too long. If there is insufficient sludge in the tank the settlement process cannot operate correctly and the solids will tend to remain in suspension.
Our infrared sensors are ideally suited to monitoring the sludge/water interface even when the settlement process is not working effectively and the interface has become indistinct.
General Specification Physical |
|
---|---|
Dimensions (hxwxd) | 490 x 350 x 300 mm |
Weight | 15 kg |
Protection Class | IP55 Outer Enclosure with IP65 electronics housing |
Enclosure Material | GRP Outer Enclosure with Polycarbonate inner |
Cable Entry | 3x M20 |
Cable Core Size | Max Conductor Size 2.5 mm² |
Electrical | |
Power Supply | 85 to 264 VAC 47-65 Hz |
Power Rating | 25W |
Environmental Data | |
Operating/Storage Temperature | 0 to 50ºC |
Location | Indoor/Outdoor |
User Interface | |
Display | 3 Digit, 7 Segment LED Display of 0-100% |
Setup | Potentiometer and Push Buttons on main PCBA |
Units of Measurement | %age Depth |
Output Signals | |
Analogue Output | 4-20 mA, max load 500 ohm |
Relays | 1, set at 0 and 100% and is not adjustable |
Contacts | Contact Closure, 0.55 A @ 100VDC |
Local Annuication | 6 LED's on main PCBA |
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.