SoliTechw2 IL Suspended Solids and Sludge Density Sensor


Quantity: Out Of Stock

Category: WaterWatch2 Monitors

Quick Overview:

Floating Oil on Water Sensor

Contamination of water courses by visible oil is a problem that requires fast, reliable detection to prevent damage to either the local environment or a water treatment process. If oil is allowed to enter a river then wildlife can be harmed, if the oil then enters a drinking water plant, damage can be caused to the processing system or more critically the quality of the drinking water can be affected.

Early warning of a problem allows remedial action to be taken either by automatically shutting down the intake to a process or by raising an alarm calling for manual intervention. The 7300w² monitor can also be connected to pollution prevention equipment such as oil dispersants or oil absorbing mops, booms, and skimmers.

The OilTechw² sensor can be deployed in any application where the surface of the water is relatively calm, the system will react rapidly to both partial and complete films of oil on the water surface. The measuring system is highly stable and only needs occasional validation to ensure reliable operation.

The unsinkable floating sensor has a dual hull designed to channel any oil passing through the centre of the float so that it is presented to the detector. The non-contact infrared sensor emits light that is reflected from the water surface, any oil that is present increases the amount of light reflected and this is then converted into the desired output signals. The float is supplied with two fixing cables and a weight to keep it stationary and correctly orientated.

Tag: #223909  #223924 

Share: Messenger


General Specification 

Physical
Dimensions 150 x 590 x 600 mm (H x W x D)
Weight 2.2 kg (including 10 metres of cable)
Protection Class IP68
Enclosure Material Fibre Glass coated Float with Black Acetal Transmitter Housing and Stainless Steel Fittings
Cable Entries Integral Gland Gland
Cable Type 4 Core, 2 Twisted Pair, 5 mm O/D Polyurethane Coated
Cable Length 10 metres standard, 100 metres maximum
Service Requirement No Routine servicing required
The sensor is not in direct comtact with the water and therefore routine cleaning is not necessary, however due needs to be paid to the optical surface after any pollution event.
Environmental Data  
Operating Temperature 0 to 60ºC
Interface to Monitor  
Power Supply 12 VDC from Monitor
Sensor Output ModTechw², RS485

 

Measurement Characteristics
Measurement Principle Light Back Scatter
Wavelength 860 nm Infrared
Flow Rate The sensor must be placed in a stable flow, avoiding turbulence or surface disturbance


Sorry, Currently No Video Uploaded.

SoliTechw2 IL Suspended Solids and Sludge Density Sensor


Please Leave Your Product Enquiry Here. We will Get Back To You Soon.

Product Specifications

  • Product SKU : -
  • Weight (GRAM) : -
  • Dimension : -