The FLIR MR40 is a pocket-portable, rugged 2-pin, single-scale moisture meter with an integrated flashlight for wood and common building materials — ideal for builders, building inspectors, remodelers, moisture remediation technicians, pest control professionals, and residential roofing and flooring contractors. Providing reliable and accurate measurements offered at a highly affordable price point, MR40 is a quick and easy-to-use tool to find and quantify moisture content.
EASY TO USE
Equipped with a clear LCD display, a simple On/Off button with 'Auto Power Off', replaceable pins, and an audible indication of measured range, the MR40 is a simple and effective tool for reliable measurements.
CONVENIENT, PORTABLE, RUGGED DESIGN
The MR40 is small enough to carry in your pocket, IP54 splash-proof rated, and 3-meter drop tested, so it's always ready to work when — and wherever— you are. The MR40 is small enough to carry in your pocket, IP54 splash-proof rated, and 3-meter drop tested, so it's always ready to work when — and wherever— you are.
RELIABLE AND ACCURATE MEASUREMENTS
The MR40 has all the essential features you need to quickly verify moisture and determine the severity of the problem including a measurement 'hold' function and calibration/pin check integrated in the cap.
24.5 cm x 8.5 cm x 6.5 cm (9.7 in. x 3.4 in. x 2.5 in.)
80g (2.8 oz) with batteries
COMPLIANCE & CERTIFICATIONS
3 m (9.8 ft.)
IP54 Splash Proof
-10 to 60°C (14 to 140°F)
MEASUREMENT & ANALYSIS
5 to 12%: Low Beep rate. 13 to 60%: Higher beep rate.More than 60%: Highest Beep rate (Display OL)
Calibration-Pin Check Integrated in Cap
5 to 30% MC (Moisture Content): +/- 2%30 to 60% MC (Moisture Content): Reference onlyNote: For materials other than Group 9/Building Materials: plywood, drywall, and oriented strand board (OSB), download the MR40 Material Conversion Table (publication MR40-AN01): http://tinyurl.com/jteb653